Reading the panel
Wolf Cooktop Displays and Codes, Defined
An induction cooktop that has stopped doing what it was asked is usually still talking. It will not say why in words, and it will not say it the same way on every model, so each page here is named for what the appliance does rather than for a designation we cannot confirm you are looking at.
Read the indication first and the fault list gets short. A level that refuses to settle, a zone that drops out while it is still hot and a panel that ignores a fingertip are three different problems with three different costs, and telling them apart takes nothing off the cooktop.
The indications, one page each
-
A power level that blinks instead of settling Flashing Power Level: Pan Not Detected
Pan detection is the check an induction cooktop runs before it commits power, confirming that something magnetic is actually sitting over the ring it has been asked to heat.
-
A zone that quits partway through, with the surface still hot Zone Shuts Off Hot: Over-Temperature Protection
Over-temperature protection is the cut-out an induction cooktop runs on itself, dropping a zone out of service before the parts under the glass reach a heat that would damage them.
-
A panel that lights up but will not take a setting Locked Controls: What the Lock Indicator Means
Control lock is the setting that makes a cooktop refuse the panel on purpose, so a wipe of the worktop or a leaning sleeve cannot start a zone.
Wolf · Los Angeles
Tell us what the panel is doing
Which zone, what it shows and when it started is usually enough to know what rides in the van. A flat $89 covers the visit and the diagnosis and comes off the repair.
